RIC Germany | World Meteorological Organization

RIC Germany

RIC at Hamburg/Oberschleissheim, Germany (Region VI)

(Information on this webpage is based on the latest report from the RIC.
Please refer to the RIC's website for the latest information.)

General Site Information

Address: Frahmredder 95, 22393 Hamburg, Hamburg,Germany

Website: https://www.dwd.de/kalibrierung

Contact person: Holger DOERSCHEL

Email: holger.doerschel@dwd.de

Tel: ++49 69 8062 6688

Fax: ++49 69 8062 6699

Calibration capabilities: Temperature, Relative Humidity, Atmospheric Pressure, Wind, Precipitation

Specific Information on instrument calibration capabilities

Temperature

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Pt100 4-Wire(Hamburg Setup 1/2)	-30 to 45 °C	Fluke 1594A Super-Thermomter Fluke 2590 Multiplexer, Fluke 7341 Klasmeier eXacal Pt100M	0.02 K	04/2023 05/2024	DAkKS DAkkS
Pt100 4-Wire(Hamburg Setup 2/2)	-30 to 45 °C	Fluke 1594A Super-Thermomter Fluke 2590 Multiplexer, Fluke 7341 Klasmeier eXacal Pt100M	0.02 K	11/2024 12/2023	DAkKS DAkkS
Elektronic Thermometers(Hamburg)	-30 to 45 °C	MBW T12 CTS T -70/200	0.06 K	12/2024	DAkkS
Pt100 4-Wire(Oberschleissheim)	-30 to 45 °C	Fluke 1594A Super-Thermomter+Fluke 2590 Multiplexer+Fluke 7341 SPRT Nr. 1 SPRT Nr. 2	0.02 K	11/2023 05/2023 12/2024	DAkkS DAkkS DAkkS
Elektronic Thermometers(Oberschleissheim)	-30 to 45 °C	MBW T12 Weiss WK3-600/40-S	0.06 K	12/2024	DAkkS

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

Relative Humidity

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Electronic Hygrometers(Hamburg Setup 1/3)	15 to 95 %RH (at 20 to 25 °C)	MBW DPM473 NR. 1 Thunder 2500 Nr. 1	0.1% + 0.006%*RH, but not less than 0.4 %RH	02/2024	DAkkS
Electronic Hygrometers(Hamburg Setup 2/3)	15 to 95 %RH (at 20 to 25 °C)	MBW DPM473 NR. 2 Thunder 2500 Nr. 2	0.1% + 0.006%*RH, but not less than 0.4 %RH	04/2023	DAkkS
Electronic Hygrometers(Hamburg Setup 3/3)	15 to 95 %RH (at 20 to 25 °C)	MBW DPM473 NR. 3 Thunder 2500 Nr. 3	0.1% + 0.006%*RH, but not less than 0.4 %RH	04/2023	DAkkS
Electronic Hygrometers(Oberschleissheim Setup 1/2)	15 to 95 %RH (at 20 to 25 °C)	MBW DPM473 NR. 1 Thunder 2500 Nr. 1	0.1% + 0.006%*RH, but not less than 0.4 %RH	06/2023	DAkkS
Electronic Hygrometers(Oberschleissheim Setup 2/2)	15 to 95 %RH (at 20 to 25 °C)	MBW DPM473 NR. 2 Thunder 2500 Nr. 2	0.1% + 0.006%*RH, but not less than 0.4 %RH	02/2024	DAkkS

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

Pressure

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Electronic Barometers(Hamburg)	100 to 2500 hPa	DHI 7601 Piston Gauge+ AMH38 Automatic Mass Handler Inficon CG025D Vacuum meter	2.010-5 Pabs + 0.0025 hPa	05/2024 05/2023	PTB PTB
Electronic Barometers(Oberschleissheim)	100 to 2500 hPa	DHI 7601 Piston Gauge+ AMH38 Automatic Mass Handler Inficon CG025D Vacuum meter	2.010-5 Pabs + 0.0025 hPa	06/2000 05/2023	PTB PTB

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

Wind direction

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Wind speed instruments (Hamburg)	0 to 360°	SICK AFS60A Windtunnel Goettingen Type	0,9°	04/2023	DAkkS
Wind speed instruments (Oberschleissheim)	0 to 360°	SICK AFS60A Windtunnel Goettingen Type	0,9°	05/2023	DAkkS

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

Wind speed

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Wind speed instruments (Hamburg)	0.15 to 50 m/s	Dantec 2D LDA Windtunnel Goettingen Type	1,0 % of reference+0,1 m/s	06/2023	PTB
Wind speed instruments (Oberschleissheim)	0.15 to 50 m/s	Dantec 2D LDA Windtunnel Goettingen Type	1,0 % of reference+ 0,1 m/s	06/2023	PTB

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

Precipitation

Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Traceability of Reference equipment
Instrument Undergoing Calibration	Calibration Range	Reference standard, Equipment	Calibration and Measurement Capability (CMC)*	Last standard calibration date	Calibration body
Weighing/tipping bucket instruments (Hamburg)	0.1 to 3.0 mm/min	Kern PBS6200-2M	1%, not less than 0,02 mm	03/2024	DAkkS
Weighing/tipping bucket Instruments (Oberschleissheim)	0.1 to 3.0 mm/min	Kern PBS6200-2M	1%, not less than 0,02 mm	06/2022	DAkkS

Status of accreditation (date of the latest accreditation): Valid, accredited 03/01/2025 according to ISO/IEC 17025:2018

Link to the accreditation certificate

Accreditation body: Deutsche Akkreditierungsstelle

SCS - Swiss Calibration Service

DAkKS - Deutsche Akkreditierungsstelle GmbH / German Accreditation Body

PTB - Physikalisch-Technische Bundesanstalt / The National Metrology Institute of Germany

A CMC (calibration and measurement capability) is the smallest uncertainty (k=2) of measurement that can be expected to be achieved by the RIC during a calibration under normal conditions. This CMC is evaluated by the RIC itself and described in the scope of accreditation of the RIC, if available.

Further Information

Report of the RIC (2024)

Report of the RIC (2023)

Report of the RIC (2022)

Report of the RIC (January 2021)

Report of the RIC (February 2020)

Report of the RIC (February 2019)

Report of the RIC (September 2018)